Multi monitor setup
Re: Multi monitor setup
You need to update your installation, as both the program as well as the available routes and rolling stock have already seen a number of updates.
The first update needs to be installed manually from the homepage. Download http://updates.zusi.de/Hobby_ZusiDateiverwaltung_exe_3.1.0.0_3.1.1.0.zip and run the .zup-file contained therein.
Then start the Dateiverwaltung again, select Application updates -> Neue Versionen installieren (it looks like some strings are currently missing in the translation) and press "Alle verfügbaren Updates und Add-Ons installieren" (Install all available updates and add-ons). Now you should be good to go
The first update needs to be installed manually from the homepage. Download http://updates.zusi.de/Hobby_ZusiDateiverwaltung_exe_3.1.0.0_3.1.1.0.zip and run the .zup-file contained therein.
Then start the Dateiverwaltung again, select Application updates -> Neue Versionen installieren (it looks like some strings are currently missing in the translation) and press "Alle verfügbaren Updates und Add-Ons installieren" (Install all available updates and add-ons). Now you should be good to go
Re: Multi monitor setup
I think I did it just install zusi3.
Currently I have the versions:
-Zusi 3: 3.1.3.0
-Zusidisplay: 3.2.337
I have updated again but I still do not see what routes (I hope I'm not doing anything wrong).
When I search for a schedule I can only see the following routes:
-paderborn_kassel_Ruhrtalbahn
-Ruhrtalbahn
-SFS_Goettingen_Kassel
-Wutachtalbahn
I have also noticed that often driving I get the error "fehler beim erzeugen des thread", which cuts me off the simulation.
I hope to catch up fast.
Currently I have the versions:
-Zusi 3: 3.1.3.0
-Zusidisplay: 3.2.337
I have updated again but I still do not see what routes (I hope I'm not doing anything wrong).
When I search for a schedule I can only see the following routes:
-paderborn_kassel_Ruhrtalbahn
-Ruhrtalbahn
-SFS_Goettingen_Kassel
-Wutachtalbahn
I have also noticed that often driving I get the error "fehler beim erzeugen des thread", which cuts me off the simulation.
I hope to catch up fast.
- Michael Springer
- Beiträge: 2933
- Registriert: 24.06.2002 16:22:44
- Wohnort: Schwäbisch Gmünd
Re: Multi monitor setup
The newest version of ZusiSim ist V3.1.5.0. It seems that the update process isn't done completely. But I have no idea why this happens.-Zusi 3: 3.1.3.0
What shows the menu item New versions -> Version overview for applications/addons in Zusi File Management?
Michael
Re: Multi monitor setup
Hi.
Finally I have been able to update completely and I have version 3.1.5.0. Surely it was my mistake to not clarify with the options in German. After all the updates I see the options in English, which obviously makes it easier for me to understand the options. I still do not understand what happened, because I updated all the available options, but it did not get to be completed until the last version.
In any case I already appear all the routes and trains that I was missing.
I am very grateful to the help and attention that is being given to me in this forum. I hope that with a little time I no longer need, at least as often!
Now, to get involved with zusidisplay and the different options of zusi3. The German signaling will also be a challenge.
Many thanks
Finally I have been able to update completely and I have version 3.1.5.0. Surely it was my mistake to not clarify with the options in German. After all the updates I see the options in English, which obviously makes it easier for me to understand the options. I still do not understand what happened, because I updated all the available options, but it did not get to be completed until the last version.
In any case I already appear all the routes and trains that I was missing.
I am very grateful to the help and attention that is being given to me in this forum. I hope that with a little time I no longer need, at least as often!
Now, to get involved with zusidisplay and the different options of zusi3. The German signaling will also be a challenge.
Many thanks
-
- Beiträge: 3682
- Registriert: 27.01.2002 11:30:41
- Wohnort: Duisburg
Re: Multi monitor setup
Here are the german signals with english explanation:The German signaling will also be a challenge.
http://www.sh1.org/eisenbahn/index.htm" target="_blank
Holger
Re: Multi monitor setup
Thank you very much.
I'm reading it and it's perfect for me. Great document!
I'm reading it and it's perfect for me. Great document!
- Johannes
- Beiträge: 3211
- Registriert: 14.03.2009 22:36:06
- Aktuelle Projekte: Zusitools (http://git.io/zusitools)
Re: Multi monitor setup
Translations are delivered as part of add-ons, not application updates.ut438 hat geschrieben:Finally I have been able to update completely and I have version 3.1.5.0. Surely it was my mistake to not clarify with the options in German. After all the updates I see the options in English, which obviously makes it easier for me to understand the options. I still do not understand what happened, because I updated all the available options, but it did not get to be completed until the last version.
Re: Multi monitor setup
So I do not know what the problem was, but in the update program I saw most of the options in German and since I've updated completely, I see almost all of them in English. Although as I say, I may have understood something wrong.
- Carsten Hölscher
- Administrator
- Beiträge: 33468
- Registriert: 04.07.2002 00:14:42
- Wohnort: Braunschweig
- Kontaktdaten:
Re: Multi monitor setup
When the Zusidateiverwaltung.exe itself is updated, it has to be terminated. Then you have to start the download function again.
Carsten
Carsten
Re: Multi monitor setup
Ok, it's clear. One thing more learned, thank you very much!
I'm taking practice with the simulator, and I find that on many occasions, I start the activity and I find a red signal. I press F4 to accelerate the time until it allows the march but when it does I have already passed the long schedule. Is there something I'm doing wrong? It is possible to request to pass the red signal?
I have searched the manual but when I open the Help-Documentation section, nothing appears, only a grey window. I have not found it anywhere else either.
I hope I am not bothering you too much, I have many doubts and I can not find a manual to learn, apologize.
I'm taking practice with the simulator, and I find that on many occasions, I start the activity and I find a red signal. I press F4 to accelerate the time until it allows the march but when it does I have already passed the long schedule. Is there something I'm doing wrong? It is possible to request to pass the red signal?
I have searched the manual but when I open the Help-Documentation section, nothing appears, only a grey window. I have not found it anywhere else either.
I hope I am not bothering you too much, I have many doubts and I can not find a manual to learn, apologize.
Zuletzt geändert von ut438 am 11.06.2018 11:50:51, insgesamt 1-mal geändert.
Re: Multi monitor setup
In theory the PDF file is supposed to open in that window, but for some people (me included) this doesn't work.
As an alternative, Zusi 3's start menu folder contains a link to the documentation as well.
As an alternative, Zusi 3's start menu folder contains a link to the documentation as well.
Re: Multi monitor setup
Thanks, I've found it but only in German. Is there any translation in English?