New update issues

Hey folks, everyone speaking English may write in this category!
Antworten
Nachricht
Autor
VMPP
Beiträge: 67
Registriert: 17.02.2020 19:18:50

New update issues

#1 Beitrag von VMPP »

Hi

Since I downloaded and installed the latest update, I've been plagued with a couple of issues, mainly on the Guntershausen-Edesheim line.

One issue is reagrding the signal at hedemunden.
Everytime, when I'm driving in the direction of Edesheim the distant signal at 186.4 is showing a stop aspect.
However, when I can see the main signal, Asig, it is showing green, meaning I can free the train and go back to speed.
But, as soon as I pass the 500hz magnet befewore that signal, I get fired with the 500 magnet and emergency stop!!
Is there any issue with the programming on that magnet?

Second issue that happens not just on this line but sometimes (not always), happens when I want to enter a number in the ebula. All the numbers I press, that number is repeated.
Check the annex pic. I finished the first part of the route train 16250 and was entering the second part, 16251, and this was the result I got! 166225511, and I can't go around it
Bild

yxyx
Beiträge: 272
Registriert: 05.07.2022 11:26:10

Re: New update issues

#2 Beitrag von yxyx »

VMPP hat geschrieben: 31.05.2024 02:27:38 One issue is reagrding the signal at hedemunden.
Everytime, when I'm driving in the direction of Edesheim the distant signal at 186.4 is showing a stop aspect.
However, when I can see the main signal, Asig, it is showing green, meaning I can free the train and go back to speed.
But, as soon as I pass the 500hz magnet befewore that signal, I get fired with the 500 magnet and emergency stop!!
Is there any issue with the programming on that magnet?
This error is already known:
viewtopic.php?p=355310#p355310

Best regards
yxyx

VMPP
Beiträge: 67
Registriert: 17.02.2020 19:18:50

Re: New update issues

#3 Beitrag von VMPP »

yxyx hat geschrieben: 31.05.2024 06:47:28
VMPP hat geschrieben: 31.05.2024 02:27:38 One issue is reagrding the signal at hedemunden.
Everytime, when I'm driving in the direction of Edesheim the distant signal at 186.4 is showing a stop aspect.
However, when I can see the main signal, Asig, it is showing green, meaning I can free the train and go back to speed.
But, as soon as I pass the 500hz magnet befewore that signal, I get fired with the 500 magnet and emergency stop!!
Is there any issue with the programming on that magnet?
This error is already known:
viewtopic.php?p=355310#p355310

Best regards
yxyx

Ahhh ok
I don't really go to the german forum...eheheh

VMPP
Beiträge: 67
Registriert: 17.02.2020 19:18:50

Re: New update issues

#4 Beitrag von VMPP »

And yet, another one.

Trains on the siegstrecke, S-bahn nach blankberg, start off without any data.
No timetible, and the PZB is set at 55!!

Bild

Benutzeravatar
F. Schn.
Beiträge: 6945
Registriert: 24.10.2011 18:58:26

Re: New update issues

#5 Beitrag von F. Schn. »

Siegstrecke has some mayor bugs since the last big update due to simultaniously more strict technical requirements. Unfortunately it hasn't been updated since then and won't be updated in this update.
Diese Signatur möchte folgendes bekannter machen: ZusiWiki · ZusiSK: Streckenprojekte · YouTube: Objektbau für Zusi · euirc: Zusi-Chat

VMPP
Beiträge: 67
Registriert: 17.02.2020 19:18:50

Re: New update issues

#6 Beitrag von VMPP »

F. Schn. hat geschrieben: 01.06.2024 14:41:38 Siegstrecke has some mayor bugs since the last big update due to simultaniously more strict technical requirements. Unfortunately it hasn't been updated since then and won't be updated in this update.
And regarding the ebula train number input? Is it a known problem?

Benutzeravatar
Jens Haupert
Beiträge: 4971
Registriert: 23.03.2004 14:44:34
Aktuelle Projekte: http://www.zusidisplay.de
Wohnort: Berlin
Kontaktdaten:

Re: New update issues

#7 Beitrag von Jens Haupert »

Hi,

please check if the error is still present after installing the comming updates. Thank you.

Best regards,
Jens

VMPP
Beiträge: 67
Registriert: 17.02.2020 19:18:50

Re: New update issues

#8 Beitrag von VMPP »

When is the expected release date for the next update?

Benutzeravatar
Jens Haupert
Beiträge: 4971
Registriert: 23.03.2004 14:44:34
Aktuelle Projekte: http://www.zusidisplay.de
Wohnort: Berlin
Kontaktdaten:

Re: New update issues

#9 Beitrag von Jens Haupert »

Now

VMPP
Beiträge: 67
Registriert: 17.02.2020 19:18:50

Re: New update issues

#10 Beitrag von VMPP »

I was doing a bit of a test drive after the new update 205.

Why does the brake pressure on the 612 stays such a long time at 5.5 bar after the brake release?
It only comes back to the normal 5 bar value around after 5 minutes of driving
Is this a normal behaviour?

Bild

Antworten