Dynamic brake for ICE 1

Hey folks, everyone speaking English may write in this category!
Antworten
Nachricht
Autor
fakenham1
Beiträge: 10
Registriert: 23.03.2021 23:34:57

Dynamic brake for ICE 1

#1 Beitrag von fakenham1 »

Hi, sorry a bit of noob question again. Watching this excellent video I've noticed (I think) that the driver brakes using dynamic brakes only initially, followed by the air brake. This with the ICE 1 with a single brake lever, around 12:02 in the video.

https://www.youtube.com/watch?v=jQBRElqF1kI

How is this done in Zusi with the single brake lever? The numpad dynamic brake keys have no effect. I'm guessing in Zusi the dynamic and air brakes are blended, or is the initial application dynamic only? Many thanks.

willweg
Beiträge: 56
Registriert: 09.05.2022 14:21:20

Re: Dynamic brake for ICE 1

#2 Beitrag von willweg »

Good point. I understand from various sources, in particular this podcast (https://zugfunk-podcast.de/2022/03/22/zf60/ @ 1:23:58 - in German only), that the driver can switch between three different brake modes (dynamic/electric only, indirect/air only, combined dynamic/air), and you actually see the driver switching to a different braking mode here: https://youtu.be/jQBRElqF1kI?si=Lpzuqr-3hunSH-Jx&t=910. I assume he's switching from dynamic to combined because he used the dynamic only in the tunnel and due to the wet rails outside of the tunnel he now needs more braking power for the upcoming stop.

I have a directly related question: Does the driver see the brake mode on the display, and if so where/how?

Thanks,
Will

Jan
Beiträge: 527
Registriert: 28.11.2007 19:13:51
Wohnort: Stutensee

Re: Dynamic brake for ICE 1

#3 Beitrag von Jan »

Zusi currently cannot do that kind of brake mode switching.

Antworten