Seite 1 von 1

Crashes after upgrading to 3.5

Verfasst: 13.02.2023 08:07:52
von hansjohnson
I recently upgraded to 3.5.2.2 via Steam and have installed Runtime 6.0.1.3 x64 & x86.

After Lunching ZusiSim.64.exe it enters the default screen like the screenshot below, but nothing is clickable. It automatically exits after a few seconds without reporting an error.

Bild

Re: Crashes after upgrading to 3.5

Verfasst: 13.02.2023 18:11:50
von Carsten Hölscher
What is the 32 bit version doing?

Carsten

Re: Crashes after upgrading to 3.5

Verfasst: 14.02.2023 01:35:34
von hansjohnson
Carsten Hölscher hat geschrieben: 13.02.2023 18:11:50 What is the 32 bit version doing?

Carsten
Same as 64.

Re: Crashes after upgrading to 3.5

Verfasst: 15.02.2023 20:54:02
von F. Schn.
Does it report an error in the Windows Error Log?

Re: Crashes after upgrading to 3.5

Verfasst: 16.02.2023 05:06:39
von hansjohnson
F. Schn. hat geschrieben: 15.02.2023 20:54:02 Does it report an error in the Windows Error Log?
No error report.

Re: Crashes after upgrading to 3.5

Verfasst: 16.02.2023 12:42:24
von Bernhard K.
Not sure if it makes sense, but what you could try is running Zusi through x64dbg (File -> Open, then press Debug -> Run a few times until the Program exits) and check the "Log" tab for error messages.

Re: Crashes after upgrading to 3.5

Verfasst: 16.02.2023 14:23:14
von Carsten Hölscher
Do the other Zusi programs start?

Carsten

Re: Crashes after upgrading to 3.5

Verfasst: 17.02.2023 06:11:26
von hansjohnson
Carsten Hölscher hat geschrieben: 16.02.2023 14:23:14 Do the other Zusi programs start?

Carsten
Zusi3DEditor.64 (3.5.2.1) OK
ZusiDateiverwaltung.64 (3.5.2.1) OK
ZusiFtdEditor.64 (3.5.2.1) OK
ZusiFzgEditor.64 (3.5.2.1) OK

ZusiDisplay.64 (3.5.3.0) OK

Re: Crashes after upgrading to 3.5

Verfasst: 19.02.2023 13:59:10
von F. Schn.
Looks like a problem with the web view component. But I'm not sure how to verify this...
Are there some unexpected folders in the ZusiSim.64.exe directory?

Re: Crashes after upgrading to 3.5

Verfasst: 19.02.2023 16:20:23
von hansjohnson
F. Schn. hat geschrieben: 19.02.2023 13:59:10 Looks like a problem with the web view component. But I'm not sure how to verify this...
Are there some unexpected folders in the ZusiSim.64.exe directory?
I think no.
Bild

Re: Crashes after upgrading to 3.5

Verfasst: 19.02.2023 16:48:29
von Carsten Hölscher
In the 3D-Editor a preview of the "Befehl" uses the webview, too.

Carsten

Re: Crashes after upgrading to 3.5

Verfasst: 20.02.2023 19:02:27
von F. Schn.
Carsten Hölscher hat geschrieben: 19.02.2023 16:48:29 In the 3D-Editor a preview of the "Befehl" uses the webview, too.
To reproduce:
* Open Routes\_Docu\Kap3_Uebungsstrecke\000442_005680_Eslohe\Eslohe_1980.st3
* Press Ctrl+F -> 212 -> OK
* Press Ctrl+E
* Press "Signaleigenschaften / signal settings" at the blue direction
* Select Tab "Ersatzsignale/Substitute signals"
* Select the first column
* Press "Befehls-ID ermitteln... / Compute order ID..."
* Press "Test+Schließen / Test + Close"

There should appear a Browser Engine Window "Deutsche Bundesbahn Befehl B" and the 3D-Editor should not crash. ;)

Re: Crashes after upgrading to 3.5

Verfasst: 28.02.2023 08:41:28
von hansjohnson
The problem still exists, opens then freezes.

Re: Crashes after upgrading to 3.5

Verfasst: 28.02.2023 09:55:12
von Flo Zille
Can you try the steps given by F.Schn. in Zusi3DEditor.64.exe to see if they work or crash the 3D Editor?

Re: Crashes after upgrading to 3.5

Verfasst: 14.03.2023 09:34:55
von hansjohnson
F. Schn. hat geschrieben: 20.02.2023 19:02:27
Carsten Hölscher hat geschrieben: 19.02.2023 16:48:29 In the 3D-Editor a preview of the "Befehl" uses the webview, too.
To reproduce:
* Open Routes\_Docu\Kap3_Uebungsstrecke\000442_005680_Eslohe\Eslohe_1980.st3
* Press Ctrl+F -> 212 -> OK
* Press Ctrl+E
* Press "Signaleigenschaften / signal settings" at the blue direction
* Select Tab "Ersatzsignale/Substitute signals"
* Select the first column
* Press "Befehls-ID ermitteln... / Compute order ID..."
* Press "Test+Schließen / Test + Close"

There should appear a Browser Engine Window "Deutsche Bundesbahn Befehl B" and the 3D-Editor should not crash. ;)
After I pressed Test+Schließen, it closes, and nothing appears, no browser engine window, no error message.

Re: Crashes after upgrading to 3.5

Verfasst: 14.03.2023 18:01:00
von F. Schn.
hansjohnson hat geschrieben: 14.03.2023 09:34:55it closes
Does the Window "Befehls-ID ermitteln... / Compute order ID..." close and the 3D-Editor main window remains open, or does the 3D-Editor close in total?

Re: Crashes after upgrading to 3.5

Verfasst: 15.03.2023 07:31:08
von hansjohnson
F. Schn. hat geschrieben: 14.03.2023 18:01:00
hansjohnson hat geschrieben: 14.03.2023 09:34:55it closes
Does the Window "Befehls-ID ermitteln... / Compute order ID..." close and the 3D-Editor main window remains open, or does the 3D-Editor close in total?
Everything closed.

Re: Crashes after upgrading to 3.5

Verfasst: 16.03.2023 13:21:45
von hansjohnson
Thank you guys, although I don't know why, but it is OK now :]

Re: Crashes after upgrading to 3.5

Verfasst: 18.03.2023 22:42:15
von F. Schn.
Strange... But at least it's sloved. :)

- F. Schn.