Hi,
after reading the english manual I have some questions that will be great if someone can clear them.
In PZB system we have These 3 buttons:
1. Befehl40
2. Frei/Free
3. Wachsam/Vigilant
In LZB lights system we have these:
H - Emergency Stop or Unauthorized Passing of LZB Stop / LZB Emergency Stop by Another Train (Blinking)
G - Actual Speed (v-Ist) > Target Speed (v-Ziel) / Actual Speed (v-Ist) > Permited Speed (v-Soll) (Blinking)
E40 - LZB Backup Order / LZB Wrong Track Order (Blinking)
El - Main Switch Off / Lower Pantograph (Blinking)
Ende - End Process Acknowledged / LZB End Process Begun (Blinking)
V40 - LZB Caution Order Acknowledged / LZB Caution Order (Blinking)
B - LZB Operational
S - LZB Emergency Braking
Störung - Malfunction / Input Train Data (Blinking)
THE QUESTION:
On these 9 LZB lights, when (steady or blinking) and what (Befehl40, Frei or Wachsam) we should do for the correct operation and avoid a faulty use?
The english version of the manual is not very clear about these and german version of manual i can't read.
Thanks in advance!
Best regards
LZB Questions
Re: LZB Questions
H: Fatal driving fault. Restart Zusi.
G: See 2.12.2.4.8, non-blinking: caution if you must reduce speed. blinking + sound: too fast, reduce speed NOW!
E40: non-blinking: only information, blinking: not yet used
El: not yet used
Ende: See 2.12.2.4.10, starts with blinking+sound, confirm with frei and expect PZB to get active.
V40: See 2.12.2.4.12: Confirm with frei and drive on sight.
B: Normally no change (permanent on)
S: repaeats other informations
Ü: Normally only on (LZB mode) or off (PZB mode).
Störug (Fault): Normally off. blinking: ZusiDisplay option activated, see ZusiDisplay manual
Befehl 40: Only reminder
1000 Hz, 500 Hz, O/M/U/95/70/65/85/70/55 or simmilar: normally off in LZB mode
G: See 2.12.2.4.8, non-blinking: caution if you must reduce speed. blinking + sound: too fast, reduce speed NOW!
E40: non-blinking: only information, blinking: not yet used
El: not yet used
Ende: See 2.12.2.4.10, starts with blinking+sound, confirm with frei and expect PZB to get active.
V40: See 2.12.2.4.12: Confirm with frei and drive on sight.
B: Normally no change (permanent on)
S: repaeats other informations
Ü: Normally only on (LZB mode) or off (PZB mode).
Störug (Fault): Normally off. blinking: ZusiDisplay option activated, see ZusiDisplay manual
Befehl 40: Only reminder
1000 Hz, 500 Hz, O/M/U/95/70/65/85/70/55 or simmilar: normally off in LZB mode
Zuletzt geändert von F. Schn. am 28.08.2019 22:22:30, insgesamt 3-mal geändert.
Diese Signatur möchte folgendes bekannter machen: ZusiWiki · ZusiSK: Streckenprojekte · YouTube: Objektbau für Zusi · euirc: Zusi-Chat
Re: LZB Questions
Thank You so Much!!!
I will finish my personal manual and share here and on Steam forum. It will help newbies to enter more fast on the Zusi.
Its a reference doc in text only that covers many parts and using info from Zusi manual.
I will finish my personal manual and share here and on Steam forum. It will help newbies to enter more fast on the Zusi.
Its a reference doc in text only that covers many parts and using info from Zusi manual.
Zuletzt geändert von stavka am 29.08.2019 00:24:17, insgesamt 1-mal geändert.
- Carsten Hölscher
- Administrator
- Beiträge: 33436
- Registriert: 04.07.2002 00:14:42
- Wohnort: Braunschweig
- Kontaktdaten:
Re: LZB Questions
Suggestion for the official manual are welcome! Send me an e-Mail in you like.
Carsten
Carsten