Seite 2 von 2

Re: Multi monitor setup

Verfasst: 08.06.2018 22:09:20
von Jan
You need to update your installation, as both the program as well as the available routes and rolling stock have already seen a number of updates.

The first update needs to be installed manually from the homepage. Download http://updates.zusi.de/Hobby_ZusiDateiverwaltung_exe_3.1.0.0_3.1.1.0.zip and run the .zup-file contained therein.
Then start the Dateiverwaltung again, select Application updates -> Neue Versionen installieren (it looks like some strings are currently missing in the translation) and press "Alle verfügbaren Updates und Add-Ons installieren" (Install all available updates and add-ons). Now you should be good to go :tup

Re: Multi monitor setup

Verfasst: 09.06.2018 00:40:31
von ut438
I think I did it just install zusi3.
Currently I have the versions:
-Zusi 3: 3.1.3.0
-Zusidisplay: 3.2.337
I have updated again but I still do not see what routes (I hope I'm not doing anything wrong).
When I search for a schedule I can only see the following routes:
-paderborn_kassel_Ruhrtalbahn
-Ruhrtalbahn
-SFS_Goettingen_Kassel
-Wutachtalbahn

I have also noticed that often driving I get the error "fehler beim erzeugen des thread", which cuts me off the simulation.

I hope to catch up fast. :O

Re: Multi monitor setup

Verfasst: 09.06.2018 08:38:42
von Michael Springer
-Zusi 3: 3.1.3.0
The newest version of ZusiSim ist V3.1.5.0. It seems that the update process isn't done completely. But I have no idea why this happens.

What shows the menu item New versions -> Version overview for applications/addons in Zusi File Management?

Michael

Re: Multi monitor setup

Verfasst: 09.06.2018 13:37:17
von ut438
Hi.
Finally I have been able to update completely and I have version 3.1.5.0. Surely it was my mistake to not clarify with the options in German. After all the updates I see the options in English, which obviously makes it easier for me to understand the options. I still do not understand what happened, because I updated all the available options, but it did not get to be completed until the last version.
In any case I already appear all the routes and trains that I was missing.
I am very grateful to the help and attention that is being given to me in this forum. I hope that with a little time I no longer need, at least as often!
Now, to get involved with zusidisplay and the different options of zusi3. The German signaling will also be a challenge.

Many thanks

Re: Multi monitor setup

Verfasst: 09.06.2018 13:54:15
von Holger Lürkens
The German signaling will also be a challenge.
Here are the german signals with english explanation:

http://www.sh1.org/eisenbahn/index.htm" target="_blank

Holger

Re: Multi monitor setup

Verfasst: 09.06.2018 20:14:30
von ut438
Thank you very much.
I'm reading it and it's perfect for me. Great document! :applaus

Re: Multi monitor setup

Verfasst: 09.06.2018 21:59:19
von Johannes
ut438 hat geschrieben:Finally I have been able to update completely and I have version 3.1.5.0. Surely it was my mistake to not clarify with the options in German. After all the updates I see the options in English, which obviously makes it easier for me to understand the options. I still do not understand what happened, because I updated all the available options, but it did not get to be completed until the last version.
Translations are delivered as part of add-ons, not application updates.

Re: Multi monitor setup

Verfasst: 09.06.2018 22:31:18
von ut438
So I do not know what the problem was, but in the update program I saw most of the options in German and since I've updated completely, I see almost all of them in English. Although as I say, I may have understood something wrong.

Re: Multi monitor setup

Verfasst: 10.06.2018 15:40:45
von Carsten Hölscher
When the Zusidateiverwaltung.exe itself is updated, it has to be terminated. Then you have to start the download function again.

Carsten

Re: Multi monitor setup

Verfasst: 11.06.2018 11:46:53
von ut438
Ok, it's clear. One thing more learned, thank you very much!

I'm taking practice with the simulator, and I find that on many occasions, I start the activity and I find a red signal. I press F4 to accelerate the time until it allows the march but when it does I have already passed the long schedule. Is there something I'm doing wrong? It is possible to request to pass the red signal?
I have searched the manual but when I open the Help-Documentation section, nothing appears, only a grey window. I have not found it anywhere else either.
I hope I am not bothering you too much, I have many doubts and I can not find a manual to learn, apologize. :O

Re: Multi monitor setup

Verfasst: 11.06.2018 21:02:54
von Jan
In theory the PDF file is supposed to open in that window, but for some people (me included) this doesn't work.
As an alternative, Zusi 3's start menu folder contains a link to the documentation as well.

Re: Multi monitor setup

Verfasst: 12.06.2018 19:06:38
von ut438
Thanks, I've found it but only in German. Is there any translation in English?