Zusi 3 Questions ?

Hey folks, everyone speaking English may write in this category!
Antworten
Nachricht
Autor
David_93
Beiträge: 13
Registriert: 27.05.2017 10:14:34

Zusi 3 Questions ?

#1 Beitrag von David_93 »

?( Good Day, My name is David and I'm new to the forum. I'm Italian and I love your railroads and locomotives a lot. I was willing to buy Zusi 3 (Hobby), and I wanted to ask a few questions.

1) Is there a possibility to put in service the Lok to zero? Or turn on batteries, prepare Lok etc?
2) Is there a possibility to enable and disable the Train Brake via the light button?
3) Is there a possibility to perform the various procedures for coupling the freight wagons or coaches or trains, performing the Change Cab etc?
4) How does the Editor work? By translating some things I can not understand if you can only use the 3D editor to generate a full line or you can not.
5) How do I install the additional displays for good?
Zuletzt geändert von David_93 am 28.05.2017 12:53:31, insgesamt 1-mal geändert.

Benutzeravatar
Carsten Hölscher
Administrator
Beiträge: 33384
Registriert: 04.07.2002 00:14:42
Wohnort: Braunschweig
Kontaktdaten:

Re: Zusi 3 Questions ?

#2 Beitrag von Carsten Hölscher »

1) depends on the configuration of the Loco
2) What's a "light button"?
3) no coupling yet
4) you get all editors you need for route-building
5) ZusiDisplay is part of the setup

Carsten

David_93
Beiträge: 13
Registriert: 27.05.2017 10:14:34

Re: Zusi 3 Questions ?

#3 Beitrag von David_93 »

Carsten Hölscher hat geschrieben:1) depends on the configuration of the Loco
2) What's a "light button"?
3) no coupling yet
4) you get all editors you need for route-building
5) ZusiDisplay is part of the setup

Carsten
Hi Carsten, This is the light button I was talking about. The button acts on the train brake manipulator and on the brake pipe when changing the cab or parking of the train or locomotive. How to do this: Place the brake manipulator in full discharges of the general brake pipe (SOS), hold down the light button until it is left in fixed light, then move the manipulator back to the position used for the ride of the train. When you have to reactivate the brake, just press and hold the light button again, when the light of the button turned off, the general brake of the train is recharged and just press the manipulator forward to give it a quick charge.

I post to you a picture of the cab (br 189) where i show you the button that I'm talking about
https://www.dropbox.com/s/jiwgn0hjkda15 ... 9.jpg?dl=0
https://www.dropbox.com/s/ulo3mfijazi5p ... o.bmp?dl=0

P.S.: Sorry for my very bad english
Zuletzt geändert von David_93 am 29.05.2017 14:42:59, insgesamt 3-mal geändert.

Benutzeravatar
Carsten Hölscher
Administrator
Beiträge: 33384
Registriert: 04.07.2002 00:14:42
Wohnort: Braunschweig
Kontaktdaten:

Re: Zusi 3 Questions ?

#4 Beitrag von Carsten Hölscher »

Seems to be "Absperren". Depends on the configuation of the loco.

Carsten

David_93
Beiträge: 13
Registriert: 27.05.2017 10:14:34

Re: Zusi 3 Questions ?

#5 Beitrag von David_93 »

Carsten Hölscher hat geschrieben:Seems to be "Absperren". Depends on the configuation of the loco.

Carsten
Ok thank you :)

Antworten